Difficulty
Moderate
Steps
1
Time Required
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Introduction
Canon Printer Error code 6000
Canon always comes out on top as the top concern in the printer category. The parts that Canon provides to customers are of the highest calibre. Clients enjoy a hassle-free working experience. As these devices are being worked on, the occasional minor trouble event is expected. Many Canon printer users have reported Error 6000 and have further asked how to resolve the issue.
Although there hasn't been an explicit justification error, this problem has occurred because of some dreadful circumstances, such as an accumulation of leftover particles inside the line feed, a scratched line feed, or a defective line feed sensor unit.
Canon Printer Error 6000 Causes:
You need to understand the motivations behind the mistake 6000 before proceeding with the arrangements.
The printer's feed tray could be fitted improperly.
A large number of reports are near the printer.
The line feed has spread or been damaged.
Giving different paper print orders without waiting for a second Sensor unit flaw or in-line feed cuts.
First Approach: Reset the Printer
Resting will fix Printer Error Code 6000. Here are the ways to make it continue.
First, disconnect the printer from the power source and wait a short while for it to enter pause mode.
Connect it once again and turn it on. Later, press and hold the "Power" button for a few seconds, and then quickly press and hold the "Stop" button twice.
Repeat this exchange a few times, and then press and release the "Power" button.
Press "Stop" four or five times.
Second Approach: Additional Solution for Fix Canon printer 6000 error
If the last method did not resolve the Canon printer error, you can try this one. Observe the method:
Clean up the paper feed tray first. The paper tray is accessible when you remove the printer cover.
Pull the paper you think is stuck in it at this time.
Try to remove the paper tray once all of the papers have been removed.
Reinstall it now as necessary, making sure that it is fitted correctly.
Reassemble all of the papers in the printer, then insert them all.
We have thoroughly examined all of the options available to you for identifying Canon Repair Service Center. However, the best course of action is to get assistance from the Canon experts if you are still having problems.
One Comment
If the last way to fix the Canon printer problem didn't work, you can try this one. Watch the process: Canon Printer Error code 6000 slope game
